Slitting and Cut to Length Combined Line Exporter China

Introduction

The slitting and cut to length combined line is an organic combination of the slitting and cut to length mills. The mill can not only coil the steel in strips, but also cut the steel strip into flat plates at a fixed length, and also cut the steel strip into slats at a fixed length.

Our slitting and cut to length combined line has a number of technologies. The automatic centering uncoiler could ensure that the coil is automatically centered to the center of the mill, and the mill can produce smoothly; The hydraulic distributing device can put the steel bar in the correct position, so that the steel bar can smoothly enter the tensioner and separator, reduce manual intervention and improve the efficiency of the mill; The head and tail bending device can ensure that the head is clamped by the jaw and improve the reliability of the jaw; Hydraulic separate jaw can firmly clamp steel bars; The intelligent discharging machine outputs the plates one by one.

Model

S/N	Model	Plate Thickness (mm)	Plate Width (mm)	Shear Speed (m/min)	Installed Capacity (kW)	Land Area (m²)
1	HNZH-01	0.2-1.0	500-1250	80-150	100	12×45
2	HNZH-02	0.5-2	900-1250	50-100	150	12×45
3	HNZH-04	1.5-4	1000-1500	40-80	175	12×45
4	HNZH-06	2-6	1000-1550	30-60	200	12×45
5	HNZH-10	4-10	1000-1550	20-40	480	12×60
6	HNZH-13	4-13	1000-1550	20-40	550	12×60
7	HNZH-14	5-14	1000-1700	15-30	600	16×70
8	HNZH-16	6-16	1200-2150	12-25	700	16×70
9	HNZH-20	8-20	1200-2150	10-20	900	16×70
10	HNZH-25	10-25	1200-2150	10-20	1200	16×70

Technology Flow

Coil preparation → Coiling trolley → Uncoiling → Head bending machine → Pinch fine levelling machine → Transverse shearing machine → Centering roller and guard roller → Disc slitting machine → Waste edge coiling → Pre-separation throwing trolley and looper device → Discharging and palletizing trolley → Feed device and fixed separating disk → Plate head and tail bending device → Tensioner → Coiler → Uncoiling trolley.